Capability Review & Equipment List

Since 1971

Our Equipment continually changes with new projects we run. If you don't see what you are looking for in the following, please inquire. We are a job shop and purchase equipment on new projects as they come up and may now have some new equipment recently acquired. We will dedicate machinery and personnel when needed on your job. We staff personnel to get your product out on time.

TOOL & DIE FACILITIES ALONG WITH MACHINING

In-house manufacturing of tooling for presswork, spinning and fabrication including jig and fixture work. Complete machining operations available for production and prototype work. LeBlond sliding gap lathe to 40″ swing, Cadillac gap lathe w/DRO to 31″, Hardinge DSM59 fully tooled, Omniturn CNC screw machine w auto-feed, Alliant DRO 2hp vertical Mill 9x 48, Index mill 9 x 48, Surface Grinder, granite table, 3 drill presses, 3 tappers, 14″X14″ heat treat oven, grinders and a wide variety of measuring devices to insure accuracy/quality. We develop tooling from design through heat treating components as needed all in our facility.

SPINNING LATHES - 12

18″ through 32″ swing, manuals with quick action and wheel locking (CNC spinning to 23″ and large work to 48″ swing available on a limited basis). Copper, Brass, Aluminum, Cold Roll, Stainless Steel 304 are all regularly stocked in many gages/thicknesses with,Bronze and others metals available upon request. Most shapes are done including beading, trimming, locking, re-entry and finishing and can be combined with many other secondary operations.

PRESSES OBI - 9

75 ton Bliss 6″ stroke 5″ air cushion, 2 - 35 ton Bliss punch presses, 2 - 22 ton Bliss punch presses, 2 - 8 ton Kenco punch presses and 1 ton Perkins punch press. To support press work there are 3 coil reels, 4 rapid air feeds, straighteners, 6 kickpresses, arbor presses and tooling including a full set of circular blanking dies.

SHEARING, CIRCLE AND SQUARE

2 Circle shears .020″ to .185″ mild steel with/without center holes, from 5″ to 48″ diameter. 2 Square shears for shearing production up to 48″ wide 10 gauge mild steel, thicker material to ½″ by CNC Plasma cutting process.

FABRICATION AND MACHINING EQUIPMENT

CNC plasma cutting to 3/8″, welding (3 TIGs, 2 MIGs, Spot, Oxy/Ac, Stud), bending (round, square tube or solid, flat), ring roller, forge (limited), cutting (cold saw, vertical bandsaw, horizontal bandsaw, gas cutting torch). Some equipment used are Engine Lathes to 40″ swing, Vertical Mill 9 x 42, Horizontal Mill, Hardinge Production Lathe, Drill Presses, Tappers, Tube benders, Finger Break, Press Break, Corner Notcher, Buffer/Polishing Lathes, Sanders, Grinders, Surface Grinder, Heat Treat Oven along with other dedicated machines.

FINISHING

Powder Coating using batch style oven 6′ X 6′ X 4′ with spray booth 8′ X 7′ X 6′, On spinning lathe finishing and polishing, Speed lathe finishing, Polishing/Buffing 10hp lathe.

TOOLING AVAILABLE - OVER 750 SPIN TOOLS and MANY MISCELLANEOUS DRAW DIES.

COMPLETE LINE OF ROUND CAN SPIN TOOLING - from 2″ to 8″ by 1/8″ increments which are oversized .020″ - .025″. Many other can sizes are available to 20″.

CIRCULAR BLANKING DIES AVAILABLE - FOR COIL RUN WASHERS AND BLANKS most materials to .063″, many available to greater thickness with modification. Special sizes can be made to order quickly in-house.

  • 1 3/8″
  • 1 5/8″
  • 1 15/16″
  • 2″
  • 2 1/8″
  • 2 ¼″
  • 2 3/8″
  • 2 ½″
  • 2 5/8″
  • 2 ¾″
  • 2 7/8″
  • 3″
  • 3 1/8″
  • 3 3/16″
  • 3 ¼″
  • 3 3/8″
  • 3 ½″
  • 3 5/8″
  • 3 ¾″
  • 3 5/16″
  • 4 1/8″
  • 4 ¼″
  • 4 3/16″
  • 4 3/8″
  • 4 ½″
  • 4 5/8″
  • 4 ¾″
  • 5″
  • 5 1/8″
  • 5 ¼″
  • 5 3/8″
  • 5 ½″
  • 5 5/8″
  • 5 ¾″
  • 6″
  • 6 1/8″
  • 6 3/8″
  • 6 ¾″

Extensive collection of single station and open die tooling is available. Nesting dies to punch holes to slip tight or oversize on most tubing sizes from 3/8″ to 2″ are available. We can make any size required.

OTHER ASSETS

We have many working relations with other companies in the metal working trade to be a Complete One Stop Shop. Many times these relations can result in less expensive, better products delivered complete to you on time

Secure Credit Card Payments

This website features secure 128-bit SSL encrypted payments

This website is secure! Secured by PayPal

Follow Us

Contact Details

Fabricor Products, Inc.
22512 Curtis Place
California City, CA 93505
760-373-8292
760-373-8732 FAX

Contact Us